Today I get problem with D-Link 528T ethernet adapter drivers on ESXi and I will show how to solve this issue.
To solve this issue You need to get D-Link 528T adapter driver and log on to ESXi with ssh.
First download D-Link 528T ethernet driver from here , unzip it and upload to your ESXi datastore.
Then enable SSH access to your ESXi host as below:
Open some ssh client software for example Putty and type your host credentials login in to ESXi:
Then change your support level on ESXi
~ # esxcli software acceptance set –level=CommunitySupported
Host acceptance level changed to ‘CommunitySupported’.
After that You can install driver like as below:
~ # esxcli software vib install -v /vmfs/volumes/datastore1/DLink-528T-1.x86_64.vib Installation Result Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. Reboot Required: true VIBs Installed: DLink_bootbank_DLink-528T_1 VIBs Removed: VIBs Skipped:
You can check your Network adapter with this command:
~ # lspci | grep net 00:07:00.0 Network controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
It is required to reboot ESXi host. After reboot new adapter shows on command line output.
~ # lspci | grep Net 00:00:19.0 Network controller: Intel Corporation 82579V Gigabit Network Connection [vmnic0] 00:07:00.0 Network controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [vmnic1]
If You have any question about this or another topic Please feel free to email us. You can also ask to create specific articles which you want to see on our blog.
